China supplier Electric Motorized Drive Head Steel Smooth PE PU Rubber Ceramic Surface Coated Lagging Roller Idler Belt Conveyor Drum Pulley of Conveyor System Component Parts pulley bearing

Product Description

High Performance Pulley for Belt Conveyors

 

BRIEF INTRODUCTION

Our company has adopted proprietary technology and equipment imported from German PWH company for the design and manufacturing of various pulleys . As a key component of the conveyor, the pulley should have high reliability. Our company’s R&D center has improved the pulley structure, reduced structural stress, and increased the lifespan and reliability of the pulley group through finite element analysis and optimization calculations. Our company’s pulley is manufactured from specialized high-end manufacturing equipment and has achieved serialized and large-scale production.

We have produced conveyor pulleys for belt width up to 2.4 m, pulley diameter up to 1.8 m, and maximum tension up to 300 tons.

PRODUCT INFORMAITON

 

Product Name Pulley
Adhesive Material smooth, ordinary rubber, wear-resistant rubber, UHMW-PE, rubber ceramic, etc..
Adehensive Treatment glued or casted
Carrying Capacity light, medium and heavy type
Connection Mode Shafts and wheels of the medium and heavy-duty pulley are connected by expansion sleeves.
Pulley Pipe made of Q235B carbon steel, with high roundness and straightness ensuring rotation balance
Shaft 45 # round steel or according to your requirements;
ultrasonic inspection, quenching and tempering treatment, strict control of key fit size tolerances, greatly extending service life.
Bearing Brands Havalo, SKF, FAG, SNK or according to your requirements
Bear Seat  Integral bearing seat, partial bearing seat
Color bright red paint or according to your requirements

VARIOUS TYPES OF PULLEY ADHESIVE SURFACE
 

BEARING SEAT MODE
 

TECHNICAL SPECIFICATIONS & PARAMETERS

 

Technical Parameters for Belt Conveyor Pulley
Belt Width (mm) Pulley Standard Diameter without Adhesive Layer(mm) 
650   200,250,320,400,500,630
800   200,250,320,400,500,630,800,1000,1250
1000   250,320,400,500,630,800,1000,1250,1400,1600
1200   250,320,400,500,630,800,1000,1250,1400,1600
1400   320,400,500,630,800,1000,1250,1400,1600
1600   400,500,630,800,1000,1250,1400,1600
1800   250,400,500,630,800,1000,1250,1400,1600
2000   400,500,630,800,1000,1250,1400,1600

 

Technical Parameters
1 Outer Circle Diameter D Deviation  200   ≤  1.5
 400   ≤  2.0
 1000 ≤  2.5
2 Radial Runout of Outer Circle  D  ≤  200 ;   without adhesive 0.3  ;with adhesive 0.5
 200 <  D  ≤ 800 ;   without adhesive 0.6;    with adhesive 1.1
 800  < D  ≤ 1600 ; without adhesive 1.0;    with adhesive 1.5
 1600 < D ≤ 1800 ;  without adhesive 1.5;    with adhesive 2.0
3 Static Balance Accuracy  G40

 

PROCESS FLOW OF PULLEY
 

Our company is equipped with necessary equipment for processing pulleys, such as large oil pressure machines, rolling machines, specialized pulley automatic explosive welding operators, large diameter lathes, boring machines, ultrasonic flaw detectors, static balancing devices, pressure casting machines, etc. Due to the special correction process adopted by the company, the pulley pipe skin is rounded before processing, and the pulley pipe wall is uniform after processing, thereby ensuring that the pulley has high static balance performance and high mechanical performance.

PRODUCT FEATURES

For pulleys with complex forces, large loads and used in heavy working conditions, they all adopt a cast welded structure and expansion sleeve connection. Compared with traditional drums in China, this type of drum mainly has the following characteristics :
(1) The structural parameters of the pulley are advanced and reasonable, and there is a dedicated computer calculation program to determine the shaft diameter, cylinder skin thickness, wheel amplitude plate shape and spacing, as well as the position of the circumferential weld seam set at the position where the stress is minimum and the number of cycles is minimum.
(2) The key technology of using single sided welding and double sided forming ensures the quality of the weld seam.
(3) The expansion sleeve connection is used between the drum hub and shaft, which not only solves the problem of key connection stress concentration that has been existing for many years and the technical difficulties of manufacturing and installing axial double keyways, but also achieves overall quenching and eliminates welding internal stress.

(4) The circumferential and longitudinal welds of the pulley have undergone non-destructive testing, and the casting quality of the wheel hub has undergone magnetic particle or ultrasonic testing.
(5) The total radial runout of the outer circle after roller casting is less than 1mm.
(6) All drums undergo static balance tests before leaving the factory to achieve G40 accuracy.
(7) All driving pulley and directional pulley with high stress have undergone finite element analysis to ensure that the stress and strain of the rollers meet the requirements.

Due to a series of measures taken, the pulley group produced by SK has a reasonable structure, large bearing capacity, and reliable performance. And it overcomes the problem of fatigue fracture at the welding seam of the existing pulley plate in China. The pullley (including the welding part) is guaranteed to have a rotational fatigue strength of over 108°.

WORKSHOP OF FINISHED PULLEIES

PACKAGE AND DELIVEYR
 

APPLICATION INDUSTRIES
 

CONVEYORS EPC/BOT CONTRACTING CAPABILITY 
 

VARIOUS CONVEYOR SPARE PARTS SUPPLY 

 

AERIAL VIEW OF OUR FACTORY   

 

INTELLIGENT PRODUCTION & TESTING 
 

CERTIFICATES & HORNORS

BRANCHES & OFFICES

TEAM BUILDING

LONG-TERM STRATEGIC COOPEATORS

MAIN CUSTOMERS

CUSTOMERS VISITS

DOMESTIC & OVERSEAS EXHIBITIONS
 

SINGING CEREMONY

GLOBAL BUSINESS NETWORK

 

 

B /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: CE, ISO
Pulley Sizes: Kk
Manufacturing Process: Forging, Casting
Material: Carbon Steel
Surface Treatment: Smooth, Rubber or Ceramics
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant, Port, Dock, Energy, Cement, Metallurgy, Steel
Samples:
US$ 7/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

idler pulley

How do you select the right idler pulley configuration for a specific task?

Selecting the appropriate idler pulley configuration for a specific task involves considering several factors. Here are the key steps to guide you in the selection process:

1. Identify System Requirements:

Understand the specific requirements of the task or application. Determine the type of belt or chain being used, the power transmission requirements, the operating conditions (such as temperature, speed, and load), and any specific constraints or limitations.

2. Determine Belt or Chain Type:

Identify the type and specifications of the belt or chain being used in the system. This includes factors such as the belt width, pitch, tooth profile (for timing belts), and chain size. Knowing the characteristics of the belt or chain will help in selecting an idler pulley that is compatible and optimized for that specific type.

3. Consider Pulley Material and Construction:

Select a pulley material that is suitable for the task at hand. Common options include steel, cast iron, aluminum, and various plastics. Consider factors such as the required strength, durability, corrosion resistance, and the environment in which the pulley will be operating.

4. Determine Pulley Size and Configuration:

Calculate or determine the appropriate pulley size, including the diameter and width. Consider factors such as the desired belt tension, the required wrap angle (the contact area between the pulley and the belt), and any specific clearance or spacing requirements within the system.

5. Assess Bearing and Shaft Requirements:

Consider the bearing and shaft requirements for the idler pulley. Determine the load capacity, rotational speed, and any specific mounting or attachment considerations. Select bearings and shafts that can handle the anticipated loads and provide smooth operation.

6. Consult Manufacturer Recommendations:

Refer to the manufacturer’s recommendations or specifications for the idler pulley. Manufacturers often provide guidelines and technical data for their products, including load capacity charts, speed limits, and other relevant information. Ensure that the selected idler pulley aligns with these recommendations.

7. Evaluate Cost and Availability:

Consider the cost and availability of the idler pulley. Evaluate different suppliers and compare prices, ensuring that the selected pulley offers a good balance of cost-effectiveness and quality. Additionally, ensure that the idler pulley is readily available when needed.

8. Installation and Maintenance:

Lastly, consider the installation and maintenance requirements of the idler pulley. Ensure that it can be easily installed within the system and that any necessary adjustments or maintenance can be performed without significant hassle.

By following these steps and considering the specific requirements of the task or application, you can select the right idler pulley configuration that ensures proper tensioning, reliable power transmission, and optimal performance in your specific task.

idler pulley

What role do idler pulleys play in maintaining proper belt alignment?

Idler pulleys play a crucial role in maintaining proper belt alignment in mechanical systems. Here’s a detailed explanation of the role idler pulleys play in maintaining proper belt alignment:

Proper belt alignment refers to the correct positioning of the belt along the pulleys in a system. It ensures that the belt remains centered on the pulleys and follows its intended path without deviating or slipping off. Belt misalignment can lead to a range of issues, including increased friction, wear, noise, and reduced power transmission efficiency. Idler pulleys help address these alignment challenges and contribute to the smooth operation of the system.

1. Belt Tracking:

Idler pulleys guide the belt and help maintain its tracking along the pulleys. They are strategically positioned to ensure that the belt remains in the desired position and follows the correct path. By providing a reference point and support, idler pulleys prevent the belt from wandering or shifting laterally, which could otherwise cause misalignment.

2. Tension Adjustment:

Idler pulleys can be used to adjust and maintain the tension in the belt, which is crucial for proper alignment. By adding or removing idler pulleys or adjusting their position, the tension in the belt can be controlled. Proper tension ensures that the belt remains engaged with the pulleys and does not slack or become too tight, both of which can lead to misalignment.

3. Belt Support:

Idler pulleys provide support to the belt, helping to prevent sagging or excessive vibration. They act as additional contact points along the belt’s path and distribute the load, ensuring that the belt remains in its intended position. This support helps maintain the alignment of the belt, especially in applications where the belt spans long distances or encounters varying loads.

4. Load Distribution:

Idler pulleys contribute to load distribution across the belt. By introducing additional pulleys strategically, the load on the belt can be divided, reducing stress on individual components. This helps to minimize the risk of belt misalignment due to uneven loading or excessive strain. By distributing the load, idler pulleys promote uniform wear and ensure the longevity of the belt.

5. Vibration and Noise Reduction:

Idler pulleys play a role in reducing vibration and noise in mechanical systems. Misaligned belts can cause excessive vibration and noise due to uneven forces and increased friction. By maintaining proper alignment, idler pulleys help minimize these issues, resulting in quieter operation and increased system stability.

Overall, idler pulleys are essential components in maintaining proper belt alignment. Their role in guiding the belt, adjusting tension, providing support, distributing load, and reducing vibration ensures that the belt remains properly aligned, leading to improved efficiency, reduced wear, and extended belt life in mechanical systems.

idler pulley

How does an idler pulley contribute to the proper tensioning of belts and chains?

An idler pulley plays a crucial role in maintaining proper tension in belts and chains within mechanical systems. Let’s explore how an idler pulley contributes to the proper tensioning:

1. Taking Up Slack:

When a belt or chain is installed in a system, there may be some initial slack or looseness. The idler pulley is strategically positioned to take up this slack by applying tension to the belt or chain. It helps to eliminate any excessive play and ensures that the belt or chain remains properly tensioned.

2. Compensation for Thermal Expansion and Wear:

Belts and chains can experience thermal expansion during operation due to changes in temperature. Additionally, over time, belts and chains may stretch or wear out. The presence of an idler pulley allows for compensation of these factors by providing an adjustable point of tension. The idler pulley can be adjusted to maintain the desired tension, compensating for any expansion or wear that may occur.

3. Preventing Belt or Chain Slippage:

If a belt or chain is not properly tensioned, it can slip or derail from the pulleys or sprockets it is meant to drive. This can lead to loss of power transmission, reduced efficiency, and potential damage to the system. The idler pulley applies the necessary tension to keep the belt or chain securely engaged with the other pulleys or sprockets, preventing slippage and ensuring reliable power transfer.

4. Maintaining Belt or Chain Alignment:

Proper alignment of belts and chains is essential for smooth operation and efficient power transmission. The idler pulley helps maintain alignment by guiding the belt or chain along the correct path and preventing it from wandering or deviating from the intended route. This contributes to reduced wear, noise, and vibration in the system.

5. Absorbing Shock and Reducing Vibrations:

An idler pulley can also help absorb shock and reduce vibrations within the belt or chain system. By providing a point of contact and tension, the idler pulley helps to dampen any sudden or excessive movements, resulting in smoother operation and reduced stress on the system components.

It’s important to note that the proper tensioning of belts and chains requires careful consideration of factors such as the manufacturer’s specifications, load requirements, and operating conditions. The idler pulley, along with other tensioning devices in the system, should be adjusted and maintained to ensure optimal performance and longevity of the belts and chains.

China supplier Electric Motorized Drive Head Steel Smooth PE PU Rubber Ceramic Surface Coated Lagging Roller Idler Belt Conveyor Drum Pulley of Conveyor System Component Parts   pulley bearing	China supplier Electric Motorized Drive Head Steel Smooth PE PU Rubber Ceramic Surface Coated Lagging Roller Idler Belt Conveyor Drum Pulley of Conveyor System Component Parts   pulley bearing
editor by CX